Allegro软件的操作之基本设置（转自电子微博网）

seder

最近结合自己刚使用AD  pads软件 及同事刚学习allegro软件出现的问题
觉得对于新手来说 学习一门新的软件 入门很重要 比如操作 如下介绍本人使用allegro的习惯设置  
Env文件：
软件安装之后会随之产生一个pcbenv 文件  我们可在此文件里设置常用的快捷键 比如走线 旋转 镜像等等  我们可以用自己的操作习惯来加以设定
env文件的位置：计算机-----属性------高级系统设置-------高级-----环境变量----用户变量

• 
  
  
  
  
  
  会看到pcbenv文件夹 进去找到env文件 用记事本打开  会发现里面没怎么设置
  请将如下内容 复制替换进去（没有版本限制）
  
  # ALLEGRO GLOBAL Environment file
  #
  # $Header: /vobs/psd_backend_data/data/environment/env /main/182 12-Aug-03.17:39:05 fxf $
  
  # The following variables are set by the software if not preset by user:
  #     CDS_SITE, ALLEGRO_SITE, TELENV, ALLEGRO_INSTALL_DIR,
  #     ALLEGRO_INSTALL_TOOLS, ALLEGRO_INSTALL_ROOT, ALLEGRO_TYPE,
  #     __UNIX (if UNIX), _PROGRAM, HOME, LOCALPATH, LOCALENV
  # Variable names are case insensitive
  
  #--------------------------------------------------------------------
  # System Variables
  set GLOBAL = $ALLEGRO_INSTALL_DIR/text
  
  # change from LIBPATH because it conflicts with IBM's shared library
  # environment variable
  set ALIBPATH = $ALLEGRO_INSTALL_DIR/pcb_lib
  
  set COMPLIBPATH = $ALLEGRO_INSTALL_DIR/allegrolib
  
  set GLOBALPATH = . $GLOBAL
  
  # Allegro Data Services Variable
  set ADSPATH = $GLOBALPATH
  
  # Present for compatiblity with older versions of Allegro.
  ifnvar ALLEGRO_SITE "set ALLEGRO_SITE ."
  
  #--------------------------------------------------------------------
  # Configuration variables (Don't change)
  set BMPPATH = . $ALLEGRO_SITE/icons $GLOBAL/icons
  set FORMPATH = . $ALLEGRO_SITE/forms $GLOBAL/forms
  set MENUPATH = . $ALLEGRO_SITE/menus $GLOBAL/cuimenus
  
  set UNITS = $GLOBAL/units.dat
  set MATERIALPATH = . $LOCALENV $ALLEGRO_SITE $GLOBAL
  
  #Configuration paths
  set PRFEDITPATH = . configure/prfedit $LOCALENV/configure/prfedit $ALLEGRO_INSTALL_DIR/configure/prfedit
  set BATCHHELPPATH = . $ALLEGRO_INSTALL_DIR/batchhelp
  set SPROUTEPATH = $ALLEGRO_INSTALL_DIR/configure/sproute
  
  set HELPPATH = . $ALLEGRO_INSTALL_DIR/help $GLOBAL/help
  set PDFPATH = . $ALLEGRO_INSTALL_DIR/help/pdf
  
  # Graphics demo env
  set IMAGEPATH = . $ALLEGRO_INSTALL_DIR/examples/image
  
  #--------------------------------------------------------------------
  # Drawing font
  set VECTORFONTPATH = . $GLOBAL
  set ANSIFONT = ansifont
  set KANJIFONTPATH = . $GLOBAL/fonts/kanji
  set KANJIFONT1 = kanjifont1
  set KANJIFONT2 = kanjifont2
  
  #--------------------------------------------------------------------
  # Display Variables
  
  set display_backingstore  on
  
  # disable repair under ratsnests
  set display_norepair rats
  set display_shapefill_analysis 1
  
  #--------------------------------------------------------------------
  #--------------------------------------------------------------------
  set compalib = $ALIBPATH/symbols $COMPLIBPATH/symbols
  set topfilelib = $ALIBPATH/templates $COMPLIBPATH/templates
  set signal_install_dir = $ALLEGRO_INSTALL_DIR/signal
  set signal_optlib_dir = $signal_install_dir/optlib
  
  # HDL Supported Design Library Search Path Variables
  set MODULEPATH = . $ALLEGRO_SITE/modules
  set TILEPATH = . $ALLEGRO_SITE/modules
  set PADPATH = . symbols .. ../symbols $ALLEGRO_SITE/padstacks $compalib
  set PSMPATH = . symbols .. ../symbols $ALLEGRO_SITE/symbols $compalib
  set TECHPATH = . $ALLEGRO_SITE/tech $GLOBAL/tech
  set TOPOLOGY_TEMPLATE_PATH = . templates .. ../templates $ALLEGRO_SITE/topology $topfilelib
  
  # SigNoise data installation directory
  set SIGNOISEPATH = . $LOCALENV $ALLEGRO_SITE/signal $signal_install_dir $signal_optlib_dir $GLOBAL
  
  #--------------------------------------------------------------------
  # Non-HDL Supported Design Search Path Variables
  set ARTPATH = . ..
  set APTPATH = . ..
  set CLIPPATH = .
  set DCLPATH = . .. $ALIBPATH $COMPLIBPATH
  set DEVPATH = . devices .. ../devices $ALLEGRO_SITE/devices $ALIBPATH/devices $COMPLIBPATH/devices
  set DFAAUDITPATH = . $ALLEGRO_SITE/assembly $ALLEGRO_INSTALL_DIR/assembly
  set NCDPATH = . .. $ALLEGRO_SITE/nclegend $GLOBAL/nclegend
  set SCRIPTPATH = . $ALLEGRO_SITE/scripts $GLOBAL/script
  set TEXTPATH = . $ALLEGRO_SITE/extracta $GLOBAL/views
  set VIEWPATH = . $ALLEGRO_SITE/views
  set XTALK_TABLE_PATH = . xtalk_tables .. ../xtalk_tables $ALLEGRO_SITE/xtalk $ALIBPATH/xtalk_tables
  set WIZARD_TEMPLATE_PATH = . .. $ALLEGRO_INSTALL_DIR/pcb_lib/symbols/template
  
  # System Configuration .scf file search path
  set SCFPATH = . scfs .. ../scfs
  
  # diff pair overide variable set for 14.2 so etch edit uses the diff
  #  pair primary separation for line to line space between two nets of the
  #  same diff pair.  Remove this for 15.0.
  set drc_diff_pair_overide 0
  
  # Display the headsup meter in a fixed position in the control panel.
  set allegro_dynam_timing_fixedpos
  
  
  #--------------------------------------------------------------------
  #--------------------------------------------------------------------
  # alias
  # May use function keys F2-F12, most Alpha-numberic keys with control
  # modifier (although Control - C, V and X are reserved for copy, paste and cut)
  # and Navigation Keys (Home, Up arrow, Esc, etc.) These items may be modifed
  # by the following:
  #     Modifier
• 红色高亮部分是常用的操作命令：可以就习惯加以修改   其他的可以自己琢磨设定下
  具体操作命令的意义解释 去百度  呵呵
  其中有些大小写 funckey  D delete  
                        funckey  d delete  “D” “ d”均代表delete命令  
  目的是避免不小心按到大小写切换命令 导致操作错误的指令
  
  亦可在软件里进行设定 alias+快捷键+命令
  
  
  
  • 
    
    
    
    
    
    
    或输alias 弹出对话框进行修改
    
    funckey+快捷键+命令
    
    
    
    • 
      
      
      
      
      
      
      还有一种录制的方法  录制相对于前面几种复杂了 不予介绍
      
      二：可以在网上当一些skill  一些易于操作 切换的skill
      比如按数字1  立马top面  2 第二层  ………
      一键打开丝印 阻焊等   
      有需要及想知道如何使用相关skill可到网上下载   或跟帖我发于大家
      
      知道如何得心应手的去使用软件 就可以用心的进行PCB 的设计了  希望这次交流能提高大家软件使用效率
      写的有点碎 抛砖引玉  
      奋斗的小伙子
• 
  

阿伟

赞一个，可以实现

seder

阿伟 发表于 2014-9-2 22:28
赞一个，可以实现

看到不错就转载了。适合初学者。

月下枯竹

kkkkkkkkkkkkkkkkkkkkk

yangyabo

非常不错，很容易理解

Techwang

涨姿势了，以前真不知道还可以用命令设置 funkey

seder

Techwang 发表于 2014-12-3 14:41
涨姿势了，以前真不知道还可以用命令设置 funkey