<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>研发设计门户网 - SI|PI 仿真</title>
    <link>https://www.techaird.com/forum.php?mod=forumdisplay&amp;fid=44</link>
    <description>Latest 20 threads of SI|PI 仿真</description>
    <copyright>Copyright(C) 研发设计门户网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 24 Aug 2026 10:35:42 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.techaird.com/static/image/common/logo_88_31.gif</url>
      <title>研发设计门户网</title>
      <link>https://www.techaird.com/</link>
    </image>
    <item>
      <title>逻辑电平之常见差分逻辑电平（转载）</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3373</link>
      <description><![CDATA[转载：http://xilinx.eetrend.com/d6-xilinx/article/2018-11/13946.html本篇主要介绍常用的差分逻辑电平，包括LVDS、xECL、CML、HCSL/LPHCSL、TMDS等。1、LVDS电平LVDS器件是近年来National Semiconductor公司发展的一种高速传输芯片，它的传输机制是把TTL逻辑电平转换 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>水手</author>
      <pubDate>Fri, 18 Feb 2022 05:52:19 +0000</pubDate>
    </item>
    <item>
      <title>共模电压和差模电压(转载）</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3253</link>
      <description><![CDATA[共模电压(common mode voltage):在每一导体和所规定的参照点之间（往往是大地或机架）出现的相量电压的平均值。或者说同时加在电压表两测量端和规定公共端之间的那部分输入电压。 
差模电压(differential mode voltage)：一对导线上电压的差值； 
共模、差模正是“输入 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>水手</author>
      <pubDate>Mon, 23 Nov 2020 07:08:53 +0000</pubDate>
    </item>
    <item>
      <title>高速电路设计基本概念之——period jitter，cycle-cycle jitter，N-cycle jitter，...</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3247</link>
      <description><![CDATA[高速电路设计基本概念之——period jitter，cycle-cycle jitter，N-cycle jitter，long-term jitter， TIE等  （转载）

原文链接：https://blog.csdn.net/yinuoheqian123/article/details/103968078

可以从两个角度考虑抖动，第一是瞬时角度，即这个边沿和期望的有差 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>水手</author>
      <pubDate>Fri, 25 Sep 2020 06:33:33 +0000</pubDate>
    </item>
    <item>
      <title>高速信号的预加重(Pre-emphasis)和去加重(De-emphasis) 转载</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3245</link>
      <description><![CDATA[高速信号的预加重(Pre-emphasis)和去加重(De-emphasis) 转载

原文链接：https://blog.csdn.net/yinuoheqian123/article/details/100015843


为什么要去加重或预加重？在高速信号传输中，信号链路对高频信号的衰减大于对低频信号的衰减，这就导致了高速信号中高频和低 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>水手</author>
      <pubDate>Fri, 25 Sep 2020 06:23:41 +0000</pubDate>
    </item>
    <item>
      <title>DDR4设计概述以及分析仿真案例（转载0</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3232</link>
      <description><![CDATA[DRAM （动态随机访问存储器）对设计人员特别具有吸引力，因为它提供了广泛的性能，用于各种计算机和嵌入式系统的存储系统设计中。本文概括阐述了DRAM 的概念，及介绍了SDRAM、DDR SDRAM、DDR2 SDRAM、DDR3 SDRAM、DDR4 SDRAM、DDR5 SDRAM、LPDDR、GDDR。DRAMDRAM较其它 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>水手</author>
      <pubDate>Thu, 05 Mar 2020 08:35:24 +0000</pubDate>
    </item>
    <item>
      <title>ADS进行IBIS模型仿真</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3227</link>
      <description><![CDATA[SI前仿真软件中Cadence SQ是大家比较熟悉的，不过那个界面那种操作，只能说“很不爽”。Hyperlynx操作起来倒是简单，所以很多人很喜欢用它来做前仿真。其实还有一个很好用的软件ADS做这个前仿真也是不错的。今天就给大家简单展示一下ADS的前仿真。仿真的拓扑是这样的， ...]]></description>
      <category>SI|PI 仿真</category>
      <author>易阳</author>
      <pubDate>Wed, 30 Oct 2019 07:29:03 +0000</pubDate>
    </item>
    <item>
      <title>ADS串扰分析制定线间距规则</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3226</link>
      <description><![CDATA[很多网友常常这样问，串扰仿真，差分对之间的间距多大合适啊？我设置间距这些行不行？这种问题很难回答，N多种情况，N多种权衡，这咋给结 论！有问题了用软件简单的跑一跑看一看，让软件给你点信息，很多问题就都解决了。今天我们看看用ADS跑一下能得到什么！先建这样一 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>易阳</author>
      <pubDate>Wed, 30 Oct 2019 07:27:53 +0000</pubDate>
    </item>
    <item>
      <title>信号完整性设计中的5类典型问题</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3225</link>
      <description><![CDATA[今天咱来扒一扒工程设计中关于信号完整性的那点事，Bala一下工程设计中常遇到的5类典型问题。没有因为这些纠结过的，应该还没开始做SI设计。相信在一线摸爬滚打的工程狮看了会有共 鸣！第1类问题：必须依靠仿真的问题有些问题，第一次设计时，如果不依靠仿真，没什么好 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>易阳</author>
      <pubDate>Wed, 30 Oct 2019 07:25:15 +0000</pubDate>
    </item>
    <item>
      <title>多长的走线才是传输线</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3224</link>
      <description><![CDATA[多长的走线才是传输线？这和信号的传播速度有关，在FR4板材上铜线条中信号速度为6in/ns。简单的说，只要信号在走线上的往返时间大于信号的上升时间，PCB上的走线就应当做传输线来处理。我们看信号在一段长走线上传播时会发生什么情况。假设有一段60英寸长的PCB走线，如 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>易阳</author>
      <pubDate>Wed, 30 Oct 2019 07:13:58 +0000</pubDate>
    </item>
    <item>
      <title>DDR2-800和DDR3的PCB信号完整性仿真</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2088</link>
      <description><![CDATA[]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Wed, 13 Jan 2016 01:47:28 +0000</pubDate>
    </item>
    <item>
      <title>《高速电路(PECL、LVECL、CML、LVDS)接口原理与应用》讲义</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2086</link>
      <description><![CDATA[《高速电路(PECL、LVECL、CML、LVDS)接口原理与应用》讲义]]></description>
      <category>SI|PI 仿真</category>
      <author>易阳</author>
      <pubDate>Tue, 05 Jan 2016 01:57:31 +0000</pubDate>
    </item>
    <item>
      <title>关于目标阻抗</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2073</link>
      <description><![CDATA[目标阻抗大家都很熟悉了。但是这个目标阻抗是电源完整性仿真里的一个有用但不精确的标准。


其中：Ztarget目标阻抗Power Supply Voltage是工作电压Allowed Ripple 是允许的工作电压纹波系数Current 是工作电流，目前这个值是用最大电流的1/2来替代。当然也可以使用最大 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Thu, 10 Dec 2015 03:21:58 +0000</pubDate>
    </item>
    <item>
      <title>IBIS 5.1抓狂着</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2003</link>
      <description><![CDATA[IBIS 5.1让我抓狂的四点
2012年8月24日，经过4年艰苦漫长的讨论，IBIS委员会通过了IBIS 5.1规范，取代了2008年8月通过的IBIS 5.0规范。IBIS 5.1规范并没有增加很多新功能，但澄清了IBIS 5.0规范新加入的IBIS-AMI仿真流程。(目前IBIS委员会的大部分工作都集中在ATM（Adva ...]]></description>
      <category>SI|PI 仿真</category>
      <author>阿伟</author>
      <pubDate>Thu, 22 Oct 2015 06:42:22 +0000</pubDate>
    </item>
    <item>
      <title>SI/PI/EMC好书推荐</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1979</link>
      <description><![CDATA[Books on signal and power integrity, EMC 

Dennis Derickson, Marcus Muller: Digital Communications Test and Measurement. Prentice Hall, January 2008. 

Madhavan Swaminathan, Ege Engin: Power Integrity Modeling and Design for Semiconductors and System]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Sat, 26 Sep 2015 09:48:02 +0000</pubDate>
    </item>
    <item>
      <title>抖动噪声二元性与眼图分析</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1978</link>
      <description><![CDATA[抖动噪声二元性与眼图分析


  该帖已经同步到电子微博网 若华的微博]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Fri, 25 Sep 2015 02:02:37 +0000</pubDate>
    </item>
    <item>
      <title>容性终端负载引起反射分析</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1908</link>
      <description><![CDATA[容性负载导致的反射实验1                                 若华1.什么是容性负载？谈论容性负载的意义是什么？容性负载出现在传输线中和传输线末端负载处由什么区别？2.关于容性负载许多人的认识是否还停留在TDR测试上会出现下降的“凹陷波形”？ 你明白为什么磁场T ...]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Thu, 27 Aug 2015 03:39:53 +0000</pubDate>
    </item>
    <item>
      <title>allegro SI 信号完整性仿真.pdf</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1902</link>
      <description><![CDATA[]]></description>
      <category>SI|PI 仿真</category>
      <author>易阳</author>
      <pubDate>Wed, 26 Aug 2015 02:52:41 +0000</pubDate>
    </item>
    <item>
      <title>160M SI论文讨论区</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1873</link>
      <description><![CDATA[论文就不一一在此上传了。压缩后160多M，太大了，已经发到群邮箱了。喜欢的朋友可以下载。  里面的观点有些说的模糊，有些未必正确或者准确，不过还是可以参考。  有什么问题可以在此讨论。


  该帖已经同步到电子微博网 若华的微博 ...]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Fri, 14 Aug 2015 03:52:13 +0000</pubDate>
    </item>
    <item>
      <title>交流耦合的优点</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1845</link>
      <description><![CDATA[]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Thu, 23 Jul 2015 02:46:26 +0000</pubDate>
    </item>
    <item>
      <title>AC耦合电容的选择</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1839</link>
      <description><![CDATA[]]></description>
      <category>SI|PI 仿真</category>
      <author>若华</author>
      <pubDate>Wed, 15 Jul 2015 02:24:56 +0000</pubDate>
    </item>
  </channel>
</rss>