<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>研发设计门户网 - 创客智能硬件</title>
    <link>https://www.techaird.com/forum.php?mod=forumdisplay&amp;fid=133</link>
    <description>Latest 20 threads of 创客智能硬件</description>
    <copyright>Copyright(C) 研发设计门户网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 24 Aug 2026 09:33:04 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.techaird.com/static/image/common/logo_88_31.gif</url>
      <title>研发设计门户网</title>
      <link>https://www.techaird.com/</link>
    </image>
    <item>
      <title>Sony图像传感器接口SLVS-EC开发分享第一部分：标准简要解读</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=3403</link>
      <description><![CDATA[Sony图像传感器接口SLVS-EC开发分享第一部分：标准简要解读转载自：https://blog.csdn.net/haoxingheng/article/details/122117448

作者：Hello，Panda

前一阵子，熊猫君开发了一套Sony SLVS-EC的图像传感器接口数据接收IP，最近稍微闲了一些，码一点字儿分享一下。

 ...]]></description>
      <category>创客智能硬件</category>
      <author>水手</author>
      <pubDate>Fri, 17 Mar 2023 07:35:19 +0000</pubDate>
    </item>
    <item>
      <title>打造实用个性的Log输出宏</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2259</link>
      <description><![CDATA[我们在调试嵌入式程序的时候，用IDE+调试器是最直接的方式，但是很多时候我们还需要用串口输出来打印一些Debug的信息，来帮助我们调试。串口调试最简单的方式的话，最简单就是用printf来打印。但是只有Printf不能很好的控制输出的信息，或者让代码变得很臃肿。我 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 12 Sep 2017 00:26:32 +0000</pubDate>
    </item>
    <item>
      <title>物联网核心之MQTT移植</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2258</link>
      <description><![CDATA[在上一篇文章中，只是讲了MQTT的主要内容，至于怎么移植到STM32上，怎么使用才是最重要的关键。这里使用的平台是RT8711的WIFI SOC，使用的LWIP跟FreeRTOS，移植使用跟STM32+LWIP是没什么区别的。   先在Github上找到Eclipse的开源MQTT客户端程序https://github.com/ ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 12 Sep 2017 00:20:22 +0000</pubDate>
    </item>
    <item>
      <title>物联网核心之MQTT（一）</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2256</link>
      <description><![CDATA[MQTT，目前物联网的最主要的协议，基本所有收费的云平台都是基于MQTT协议，比如机智云，和所有的开放云平台比如中国移动的oneNet、百度的云平台也都支持MQTT的接入。虽然MQTT很火，但是目前对MQTT的很少，尤其是在如何移植到嵌入式上来。大部分的平台商的做法都是跟模 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 22 Aug 2017 16:46:50 +0000</pubDate>
    </item>
    <item>
      <title>RK3288底板 的原理图和图片  内存条接口的   布线花了一天时间  四层板 摆件花了二...</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2144</link>
      <description><![CDATA[]]></description>
      <category>创客智能硬件</category>
      <author>q270350800</author>
      <pubDate>Mon, 24 Oct 2016 08:20:54 +0000</pubDate>
    </item>
    <item>
      <title>上传一个RK3288核心板的原理图  内存条形式的  在附件中</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2143</link>
      <description><![CDATA[]]></description>
      <category>创客智能硬件</category>
      <author>q270350800</author>
      <pubDate>Sun, 16 Oct 2016 12:36:36 +0000</pubDate>
    </item>
    <item>
      <title>接下来准备做一个RK3288核心板  用板对板连接器  大家帮想下用哪种座子</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2142</link>
      <description><![CDATA[有推荐  且我采纳的   到时我会送给我的PCB原资料    板对板座子  要200多PIN样子]]></description>
      <category>创客智能硬件</category>
      <author>q270350800</author>
      <pubDate>Wed, 12 Oct 2016 01:25:19 +0000</pubDate>
    </item>
    <item>
      <title>利用国庆五天时间做的一个RK3288的核心板 allegro格式</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2141</link>
      <description><![CDATA[]]></description>
      <category>创客智能硬件</category>
      <author>q270350800</author>
      <pubDate>Sun, 09 Oct 2016 03:13:51 +0000</pubDate>
    </item>
    <item>
      <title>分享这月做的一个RK3288广告机  硬件和软件调试心得</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2128</link>
      <description><![CDATA[]]></description>
      <category>创客智能硬件</category>
      <author>q270350800</author>
      <pubDate>Sat, 10 Sep 2016 13:35:49 +0000</pubDate>
    </item>
    <item>
      <title>普源示波器算号，破解示波器自带的选件</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=2061</link>
      <description><![CDATA[昨天不经意的去百度普源DS1054，发现度娘上有破解的文章，才知道普源的示波器居然可以破解，把原来试用的选件都可以激活，最重要的是还能把我那50M的示波器破解成100M（当初因为经济的问题才选择50M的示波器，一直担心不够用）。经过一阵折腾搞到了算法器，成功的破解了 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Wed, 25 Nov 2015 14:45:58 +0000</pubDate>
    </item>
    <item>
      <title>ARM9/ARM11裸机开发笔记1之MDK开发环境和点亮LED</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1838</link>
      <description><![CDATA[很多从单片机或者从CM3转到ARM9/ARM11的时候，一开始就讲得是Uboot，Linux，然后就是什么QT等高级玩意，不像单片机有什么裸机开发的概念，的确，这些高级ARM本来就是用来跑系统，谁用来它做裸机开发呢。但是如果我们要更好了解ARM的工作原理，，尤其是想进阶嵌入式中最 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 14 Jul 2015 06:03:30 +0000</pubDate>
    </item>
    <item>
      <title>用DMA直接驱动GPIO，实现GPIO最高输出速率</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1837</link>
      <description><![CDATA[先上图：STM32F303芯片，72M的主频

可以看到GPIO的达到了14.4M的翻转速率，
      再来上代码：
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOC, ENABLE);
GPIOC-&gt;MODER |= 0x55555555;
GPIOC-&gt;OSPEEDR |= 0xFFFFFFF;
GPIOC-&gt;PUPDR |= 0x55555555; 
u32 Gpio_data[4]= {0x ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 14 Jul 2015 06:02:49 +0000</pubDate>
    </item>
    <item>
      <title>Microsoft .NET Micro Framework移植开发笔记6之电容触摸按键实验</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1836</link>
      <description><![CDATA[好久没更新笔记了，主要最近比较忙，目前在搞 ARM9 S3C2416的MF移植，就把STM32的暂时搁了，前两天S3C2416的移植有一个比较大的进展。就抽空来继STM32的移植。这次的移植比较有突破性，之前我移植和做的实验都是基于MF官方本身就支持的外设。假如官方没有支持的外设驱动 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 14 Jul 2015 06:00:26 +0000</pubDate>
    </item>
    <item>
      <title>Microsoft .NET Micro Framework移植开发笔记4战舰板固件更新</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1834</link>
      <description><![CDATA[花了几天的时间把战舰板上的LCD(两个月前就开始移LCD，期间遇到很多的问题，而且当时没有SRAM，也跑不起来MF的图形库很吃内存，），外置SRAM跟外置FLASH都移植到MF上面，MF立马更强悍起来了。移植W25Q64，在W25Q64划出4M做为C#的代码部署区，以后用VS部署的代码就会存 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 14 Jul 2015 05:58:37 +0000</pubDate>
    </item>
    <item>
      <title>Microsoft .NET Micro Framework移植开发笔记3之按键及中断</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1833</link>
      <description><![CDATA[紧接上文，继续来写GPIO口输入输出的输入。跟设置输出一样对按键进行初始化    InputPort key0 = new InputPort(MFPins.CPU.Pins.PE4, true,               Port.ResistorMode.PullUp);初始化的参数的含义是可以直接查InputPort的定义，在VS中转到InputPort的定义如 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 14 Jul 2015 05:57:36 +0000</pubDate>
    </item>
    <item>
      <title>Microsoft .NET Micro Framework移植开发笔记2之点灯神话</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1832</link>
      <description><![CDATA[写完HelloWorld后，开始进入GPIO的操作，无论是拿到任何的嵌入式的板子，第一件事情就是点亮LED。MF也是这里开始，废话不多说，直接新建VS2010的MF工程。要想点亮LED，就是要操作GPIO，要操作GPIO口就要初始，MF也是一样。在Program.cs的Main函数加入初始化 Output ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 14 Jul 2015 05:56:36 +0000</pubDate>
    </item>
    <item>
      <title>Microsoft .NET Micro Framework移植开发笔记1</title>
      <link>https://www.techaird.com/forum.php?mod=viewthread&amp;tid=1831</link>
      <description><![CDATA[今天一早收到原子哥赠送的战舰开发板，心情甚是激动，趋上班的时候，简单的移植下.net MicroFramework到战舰开发板上，带大家进入.net MicroFramework世界里。废话不说，直接上固件。     固件是bin文件，玩过STM32的人都知道怎么烧固件。这里使用战舰了UART2做为调试口 ...]]></description>
      <category>创客智能硬件</category>
      <author>蓝凌风</author>
      <pubDate>Tue, 14 Jul 2015 05:55:29 +0000</pubDate>
    </item>
  </channel>
</rss>